CAMOU Building Systems

( 305 ) 853 8287

Special Promotions

 

PBR®

Exposed Fastening System

The PBR panel's deep ribs create an even-shadowed appearance. The area between the major ribs is reinforced with minor ribs.  PBR is one of the most economical panel systems and can be used for both roof and wall applications.

 

 

STANDING SEAM ROOFS

 

 

Standing Seam Metal Roofing

 

When your design requires a roong system that is both aesthetically pleasing and structurally sound, choose one of MBCI’s standing seam metal roof (SSR) systems. Our SSR systems are some of the most durable and weathertight roof systems available in the industry, providing longevity while enhancing the appearance of the building.

 

MBCI offers two types of standing seam metal roofs: Vertical Leg structural and Trapezoidal structural.

 

 Each system carries the Underwriters Laboratories Wind Uplift (UL 90), Fire Resistance and Impact Resistance ratings covering a wide range of roof designs. Additional ratings have been given to the individual panel systems.

 

Special clips are available for thermal roof expansion and contraction during extreme temperature changes. All trim is both weathertight and aesthetically pleasing, giving the roof a clean, finished appearance.

 

 

Vertical Leg Structural Standing Seam Metal Roof Systems

 

BATTENLOK – SUPERLOK

 

The vertical leg systems blend the aesthetics of an architectural panel with the strength of a structural panel. These panels have earned several UL uplift ratings, assuring reliability of performance, while also providing exibility to meet design challenges.

 

 

 

Trapezoidal Standing Seam Metal Roof Systems

 

ULTRADECK – DOUBLELOK

 

The trapezoidal SSR systems are designed for strength, durability and weatherability. The standing seams are 3" above the lowest part of the panel, well above the water level as it ows off the roof. The rake/gable at both ends of each roof system eliminates the necessity of  finishing in the low, at part of the panel where the greatest possibilities for leaks occur in many other systems.

 

 

Batten-Lok®

BattenLok HS® panel is a vertical leg side joint that is mechanically seamed with an electric seamer for a weathertight finish. Features concealed clips and easy to handle 16" or 12" wide panels custom cut. Can be installed directly over purlins or bar joists. It does not require a solid substructure for support. Tested UL® 90

Super-Lok®

The SuperLok® standing seam roof system blends the aesthetics of an architectural panel with the strength of a structural panel. The highest Uplift ratings in the industry for standing seam roofs, assuring the reliability of performance. This panel is FM Global approved to satisfy stringent code requirements and is ICBO approved.

Double-Lok®

Double-Lok® is a metal standing seam roofing product attached to sub-framing using a variety of concealed, interlocking clips that provide for minimum panel penetrations. This panel design provides a high degree of weathertightness, tested with ASTM E283 and E331 (for air infiltration, water penetration, and wind uplift).

UltraDeck®

Ultra-Dek is a metal standing seam roofing product attached by using a variety of concealed, interlocking clips that provide for minimum panel penetrations. Designed to provide a high degree of weathertightness and tested ASTM E1680 & E1646 (air infiltration & water penetration).

 

 

We have a wide variety of models and shape types of metal roof panels.

 

Simple and economic or full complete systems with mechanically sealed seams of 180 degrees, with rigid insulations or rolled fiberglass wool, with PVC or special extra strong finishes.

 

Both systems, overlap & screwed or mechanically seamed, ensure total water tightness and weather resistant.

 

We also supply thermal insulation panels. Manufactured with internal PIR core, factory assembled, with double metal sheets, interior and exterior.

 

They are preassembled and precut, so they arrive to the jobsite ready to use.

 

They can ensure both water and thermal tightness.

 

 

 

EXPOSED  FASTENING SYSTEM

 

&

 

STANDING SEAM  ROOFS

 

 

 

 

     www.camoubuildings.com

 ( 305 ) 853 8287

CAMOU Building Systems

Submitting Form...

error.

 

CAMOU Building Systems

CAMOU Building Systems

We have a wide variety of models and shape types of metal roof panels.

 Each system carries the Underwriters Laboratories Wind Uplift (UL 90), Fire Resistance and Impact Resistance ratings covering a wide range of roof designs. Additional ratings have been given to the individual panel systems.

The SuperLok® standing seam roof system blends the aesthetics of an architectural panel with the strength of a structural panel. The highest Uplift ratings in the industry for standing seam roofs, assuring the reliability of performance. This panel is FM Global approved to satisfy stringent code requirements and is ICBO approved.

Double-Lok® is a metal standing seam roofing product attached to sub-framing using a variety of concealed, interlocking clips that provide for minimum panel penetrations. This panel design provides a high degree of weathertightness, tested with ASTM E283 and E331 (for air infiltration, water penetration, and wind uplift).

CAMOU Building Systems
CAMOU Building Systems

( 305 ) 853 8287

CAMOU Building Systems