PREPAINTED  COLORS &  FINISHES

 THERMAL PANELS COLORS

 

TEXTURED  COLORS

 DBCI DOORS COLORS
CAMOU Building Systems

( 305 ) 853 8287

Special Promotions

 

 

The actual colors and finishing techniques on metal sheeting allow such a wide range of colors, textures and durability as never before. We produce oven prepainted COLOR METAL PANELS, as SIGNATURE 200, SILICONIZED POLYESTER, and also SIGNATURE 300, with a 70% PVDF Resins of high resistance and durability.

Our Thermal Panels may also have a TEXTURED – TUFF COTE FINISH, which gives the panels a high value  most appreciated by architects and designers.

 

 

MBCI  Metal Roofing & Wall Color Charts

 

 

MBCI’s vast color selection of metal roofing and metal wall panels provides our customers with the opportunity to choose from a wide assortment of colors in two different paint systems. Outstanding performance and durability can be achieved with either system, depending upon the application. Panel types include standing seam, concealed or exposed fastening systems, soffits, curved and insulated panels.

 

Materials & Coatings

Insulated metal panels not only come in a wide variety of profiles, but they are also available in a vast assortment of colors and applied finishes.

 

COLOR OFFERINGS

Outstanding performance and durability are achieved through our two separate paint systems, Signature® 300 and Signature® 200. MBCI’s color offerings provide reflectivity performance meeting ENERGY STAR® criteria. Insulated metal roofing panels are coated with infrared reflective Cool Roof finishes.

 

SIGNATURE® 300

This coating is a fluorocarbon paint system formulated with 70% Polyvinylidene Fluoride (PVF2) resins. Fluorocarbon products use either Hylar 5000® (a registered trademark of Solvay Solexis) or Kynar 500® (a registered trademark of Arkema, Inc.) resins. The long-life finish offers the ultimate in color retention, film flexibility and durability. It is highly recommended for architectural applications.

 

SIGNATURE® 200

This paint system is a Modified Silicone Polyester paint system. These coatings offer excellent chalk and fade resistance, as well as good weathering characteristics for the commercial, industrial and institutional markets.

 

IGLOO WHITE

This paint system offers optimum exterior protection and resistance to chemical corrosion and ultraviolet radiation. This coating provides excellent chalk, fade and mar resistance. As a standard, insulated metal panels are offered with an Igloo White paint finish on the interior skins. Igloo White is an FDA-approved color.

 

GALVALUME PLUS®

Galvalume® material has a corrosion resistant aluminum-zinc alloy applied by a continuous hot-dipping process that conforms to ASTM A792 in coating class AZ55. A clear acrylic coating is applied to the Galvalume® to create Galvalume Plus®.

STAINLESS STEEL

Stainless steel is available for the interior offering for 36" and 42" wide insulated metal panels. It is also available for the exterior substrate of the Royal panel.

 

PLASTISOL COATINGS

Plastisol coatings are available for insulated metal panels. The Plastisol substrate extra corrsion resistance needed for metal buildings exposed to acid rain in industrial or chemical environments. It can be used for both roof and wall panels. The standard is 4 Mil white.

 

WARRANTIES

Signature® 300, Signature® 200 and Galvalume Plus are each warranted for exposure to normal atmospheric conditions. See Insulated Metal Panel limited warranty for details.

 

 

 

SEE  OUR  COLOR  &  TEXTURES  CHARTS

 

 

 

TECHNICAL  DATA  MATERIALS & COATINGS

 

 

The base metal is 22-, 24- or 26-gauge steel manufactured from either high-strength Galvalume® produced to ASTM A792/A792M-AZ50 or AZ55, Grade 50 or HDG produced to ASTM A653/A653M-G90 structural aluminum. Finishes include baked enamel, urethane and Plastisol. All materials are available smooth or stucco-embossed. All metal architectural panels have wide, at surfaces to meet the demands of today’s design. While MBCI has recognized and responded to this requirement, we have a responsibility to advise that a wide and perfectly at appearance is not always possible. In some wide products, panel distortion—called oil canning—may occur and require additional aesthetic tolerance and/or additional support behind the panel face. Heavier gauges, narrower widths, striations and embossing minimize oil canning.

 

PAINT FINISHES

MBCI offers one of the largest color selections in the industry. Each of our paint colors qualies as a cool roof on sloped roofs above 2:12. Our applied nishes work as an excellent alternative to masonry or tilt-wall construction and are available on our insulated metal panels.

 

SIGNATURE® 300/SIGNATURE® 300 METALLIC

This uorocarbon paint system combines ceramic pigmentation with polyvinylidene uoride (70 percent of resin solids) for a superior, long-lasting nish. Outstanding performance and durability are achieved through this proprietary resin technology. Signature® 300 is recognized as providing unsurpassed performance in critical areas such as color retention, lm erosion rate and chemical resistance.

 

SIGNATURE® 200

Signature® 200 is a thermoset coating system composed of polyester resin modied by copolymerization with a functional silicone resin intermediate. With high quality ceramic pigmentation, Signature® 200 offers optimum exterior protection plus superior resistance to chemical corrosion and ultraviolet radiation. Signature® 200 represents the most sophisticated silicone polyester coating system in the industry.

 

COLORS

&

TEXTURES

 

     www.camoubuildings.com

 ( 305 ) 853 8287

CAMOU Building Systems

Submitting Form...

error.

 

CAMOU Building Systems
CAMOU Building Systems
 THERMAL PANELS COLORS
 TEXTURED COLORS
 DBCI DOORS COLORS

CAMOU Building Systems
CAMOU Building Systems

( 305 ) 853 8287

 THERMAL PANELS COLORS
 TEXTURED COLORS
 DBCI DOORS COLORS

CAMOU Building Systems